2DT Metal Fence Mesh & Profiled Puestos A

Introducción

Construido con una sola pieza, sin costuras todo el tallo curvado post y 2D doble alambre horizontal soldada malla. El 2DT Wire Mesh Fence cuenta con un aspecto elegante y elegante con líneas dinámicas y suaves. El diseño integrado de la hebilla post conecta la malla sin requerir conectores adicionales, lo que le permite adaptarse perfectamente a terrenos irregulares e instalaciones en varios ángulos. La valla emplea un método de instalación tipo empuje para mayor comodidad y eficiencia.

Cierre de metal 2DG

Single Horizontal Wire Mesh Panel

Cierre de metal 2DG
NombreParámetro
Mesh Height(mm)1000-2430
Mesh Width(mm)2500/3000
Diámetro de alambre(mm)Ø5.0+Ø4.5+Ø5.0/Ø6.0+Ø5.0+Ø6.0/Ø8.0+Ø6.0+Ø6.0+Ø8.0+Ø8.0+Ø8.0
Espejo vertical de alambre(mm)50/55/65
Cableado horizontal (mm)200
Material Q195/Q235
Recubrimiento Zn(g/m2)80-120
ColorRAL Color Series

Post Specification

NombreParámetro
Tamaño(mm)70 * 100
Espesor(mm)1.0/1.2/1.5
MaterialQ235/DC51D
Altura1000-3000
MaterialQ235/DC51D
Recubrimiento Zn80-120 g/m2
ColorRAL Color Series
CubiertaABS
Cierre de metal 2DG

Mesh Connection

Cierre de metal 2DG

El diseño integrado de la columna está conectado a la malla con tarjetas dedicadas y pernos antirrobo, que tiene una fuerte función antirrobo.

Surface Treatment(Anti-rust Treatment)

El sustrato es galvanizado en caliente con un recubrimiento de zinc de 80-120g/m 2, y el recubrimiento exterior se rocia con polvo electrostático de poliéster con un espesor de recubrimiento de 100-120um. Hay más de 200 colores disponibles en la serie de colores RAL;

Todo el componente está galvanizado con un recubrimiento de zinc de 550g/m 2.

Colores disponibles

Colores populares

‌One-Stop Fencing: Smart Design, Global Std

Engineering grade 2D fence
  1. Drawing Deepening Service:
    Our professional and efficient drawing deepening service has significantly reduced on-site adjustment time.
  2. Custom Fencing Solutions:
    We offer one-stop fencing customization services covering the entire process from design to construction.
  3. Compliance Assurance:
    All our products adhere to international standards.
  4. Material Optimization:
    We recommend optimal material solutions based on specific usage scenarios, striking a perfect balance between cost and durability.

Installation Method

2DT Metal Fence Mesh Engineering Drawing
2DG metal fence installation Step 1: Install Post Cap for dust and water protection
2DG metal fence installation Step 2:Column installation
  1. Insert the post into the pre-drilled hole in the foundation. The pre-drilled hole size is Ø 150 * 350 mm;
  2. Use a spirit level to align the post along the axis of the wall and in the direction perpendicular to the axis of the wall.
2DG metal fence installation Step 3:Column Fixing  
  1. After the posts are aligned, secure them by wedging triangular wooden wedges on both sides of the posts along the fence axis;
  2. Ensure that the distance between the top elevation of the posts and the elevation of the foundation surface is equal to the fence installation height;
2DG metal fence installation Step 4:Mesh Panel Installation
  1. Insert the wire mesh panel into the mounting slots of the posts, and pull the panel taut outwards;
  2. Attach the temporary fixing clips between the posts and the mesh panel to take up the slack and tighten the gap between the panel and the posts.
2DG metal fence installation Step 5: Column installation
  1. Insert the wire mesh into the mounting slot of the post and pull the mesh taut outwards;
  2. Secure the temporary fixing clips between the post and the wire mesh to tighten the gap between them.
2DG metal fence installation Step 6: Column fixing and alignment
  1. Align the structure using a spirit level along the axis of the perimeter wall and in the direction perpendicular to that axis.
  2. Once the posts have been aligned, secure and brace them tightly on both sides—along the axis of the perimeter wall—using triangular wooden wedges.

Corner Installation Method

2DG metal fence installation
  1. No separate corner support is required;
  2. Can rotate at any angle from 45° to 135°;

Step Installation Method

    2DG metal fence installation
 
  1. The step height difference can be in 100 mm modules, such as 100, 200, or 300 mm;
  2. The step posts need to be lengthened to correspond to the height difference;
  3. The step posts need to be installed on the lower elevation foundation surface.

Safety accessories

Single-curved arm + barbed wire
Single-curved arm + barbed wire
Double-curved arm + barbed wire
Double-curved arm + barbed wire
Dual arm + barbed + razor wire
Dual arm + barbed + razor wire

Galería de aplicaciones

Safety accessories-2DG metal fence

Construction and installation drawings

pdf 2D Metal Fence Mesh & Profiled Posts A​–PSN&TP-1530
pdf 2D Metal Fence Mesh & Profiled Posts A​–PSN&TP-1730
pdf 2D Metal Fence Mesh & Profiled Posts A​–PSN&TP-1930

🌟 Nuestro negocio en todo el mundo 🌟

China Fence Empresa lleva a cabo negocios en todo el mundo, soldada, alambre de afeitar concertina, y una amplia gama de productos de esgrima en asociación con clientes de todo el mundo.

¿Por qué elegirnos?

Our quality compare with others

Nuestras cercas de malla soldadas cuentan con una gran galvanización que supera las alternativas rust-prone. Fabricado con alambres de acero de alta calidad, nuestras cercas ofrecen una fuerza y durabilidad superiores. A diferencia de otros que puede ver en el mercado—a menudo rompiendo o corroeando dentro de un corto tiempo—nuestros productos se construyen para durar.

Preguntas frecuentes para la cerca

¿Quiénes somos?

Somos una empresa de cerca china con 3 fábricas profesionales ubicadas en el condado de Raoyang, Ciudad de Hengshui, Provincia de Hebei. Haga clic Aquí. para más información.

Atención al cliente 24/7 – Siempre disponible para responder a sus preguntas y proporcionar asistencia oportuna. Cotización gratuita " Calculación de costes: precios precisos y transparentes adaptados a su proyecto. Soluciones de diseño personalizadas – Servicios de diseño gratuitos basados en sus requisitos específicos y condiciones del sitio. Control de calidad estricto – Cada producto es inspeccionado para cumplir con los estándares internacionales antes de la entrega. Logística eficiente y entrega rápida – Los arreglos de envío fiables para asegurar que su pedido llegue a tiempo.

Después de aprender sobre sus características, verás por qué es una elección inteligente el esgrima de malla soldado galvanizado. Como somos la fábrica, podemos ofrecerla a un precio más competitivo en comparación con las cercas con protección de doble capa como pre-galvanización más recubrimiento de PVC, que generalmente son más costosos.

Claro, haremos como la especificación detallada de los clientes, y la recomendación profesional se ofrecerá a los clientes.

EspañolesEspañolEspañol